Multiply, and know which way

Most unit conversions are a factor. Ten kilometres is about 6.2137 miles because the factor from kilometres to miles is 0.621371. The reverse factor is about 1.609344. Using the right pair matters more than remembering extra decimals.

Write the unit next to every number while you work. “10” is not a distance. “10 km” is. The unit converter on this site prints the target unit next to the result so a reversed pair is easier to spot.

Temperature is not a ratio

Celsius and Fahrenheit do not share a zero. Water freezes at 0°C and at 32°F. Converting Celsius to Fahrenheit is multiply by 1.8, then add 32. The other way is subtract 32, then multiply by 5/9. A bare multiplication will be wrong.

Length and mass do not need that shift. Metres to feet is a factor of about 3.28084. Kilograms to pounds is about 2.204623.

When not to use a general converter

Cooking volumes, tyre pressures, data sizes and historical units are outside this tool. If a specification quotes a tolerance, keep more precision than the display you finally publish, and round only at the end.

If a result looks half or double what you expected, you have usually selected the reverse pair. Convert back once. If you do not land on the original value, the factor was wrong.

PUT IT INTO PRACTICE

Try it with your own figures.

The related tool uses the method described above. Check the result against the worked example before you rely on it.

Open Unit Converter